中文
EN
SDIO Adapter
- Could we shrink the testing space occupied?
- Could we enhance the first pass yield?
- Could we reduce the facility and manpower cost?
- Could we advance the testing capacity?
免費咨詢熱線：18015561558
產品特點
Yes! You can achieve these just by one board in your palm to replace a computer, a PCI-e board, a long FPC and a daughter board, all of them.
1.The size of SD-100(As you can see the module with light in the picture) is 80*50*12mm. It is able to replace the whole set of common SDIO test environment (Computer, PCle card, Cables, SDIO transition board). It is easy to put SD-100 inside the shielding box, completely solving the problem of traditional test environment
2.With 1 MT-1040, 1 measuring instrument and 1 computer, user can achieve that 4 boxes run testing process simultaneously and 4 boards or modules run serial testing by installing 4 SD-100 and 1 UT-804 in each box.
3.We also provide automatic test solution with robotic arm. At least increase output 6 times.
Using CLP SD-100 control board
1. Is a 5cm x 8 cm SDIO to USB control board
2. Runs Linux 3.10.x kernel
3. Supports class 10 SDIO DUT testing at 50MHz
4. Already worked on 8723DS, 8189FTV/ES,9377-3 chipsets
5. FPY can be more than 99%
6. Throughput can be increased 6 times by our test solution
7. Won’t break isolation when put SD-100 into shielding box
產品參數
1.SDIO interface (In red frame): 9 pin 2.54 pitch, provide connection between fixture and DUT. We advise the distance of connection should be less than 20 cm.
2.Mini USB interface (In yellow frame) : USB 2.0, provide the connection with computer to control DUTs during test process.
3.Power socket(Blue frame): 2 pin 2.54 pitch, Sometimes the power of DUTs are provided by USB could be not enough. User could adapt external power supply +5v. We advise that user should measure the power consumption of DUTs to decide the way of supplying power.
4.Reset button (Orange frame): To restart the machine by press the button.
5.UART and GPIO’s connected point: With 2 set of UART and 10 GPIO, it supplies the connection of DUTs and the control of hardware.
6.System of adapter card: Linux
7.Driver of DUT: User can program it according to SDK of DUTs. We will provide Kermal in Linux system and Toolchain for programming use.
案例展示
系列產品
