MT-1040 Wireless Test Automation System

1.Wireless Router/ AP/Module 1 to 4 DUTs Test

2.802.11 a/b/g/n/ac，2.4G/5.8G Test Spec  

3.Blue Tooth, Zigbee, & GPS

4.Support RF Chip Calibration(Frequency , Power) 、TX(Frequency , Power, Mask ,EVM) and RX

5.Ethernet connection to DUT, Equipment, and Test PC

6.Console connection to DUT or controller ShieldingBox for Open/Close contrdling

7.Cooperate with variety Wireless Test Instrument

8.Cooperate with MT-100 and Fixture to test USB, mini PCIe, SDIO module or network interface card

About MT-1040:

RF Multi Channal Testing Solution MT-1040 is a Test Automation System. It use a wireless test instrument and a PC to parallel asynchronous test 4 DUTs calibration, TX, RX, functions. (even DUTs are the same 

Mac and IP); No need extra PCs to support multiple DUTs for download test code before testing.If utilige 4 PCs,it can also test up to 4 different DUTs. 

Advantage

MT-1040 is not only a RF switch, but also a controller 

for both test equipment and DUT.

1.Just need 1 PC and RF Instrument

2.Each DUT test procedure is independent

3.Throughput increased by more than 3.5 times

4.Manpower allocation is more flexible, the labor reduced by 2/3

CASE STUDY  

1.Time Save- From 50 second reduce to15 second each DUT

2.High Throughput- Testing time reduce to 1/3 below,Throughput increase 3 times

3.Low Equipment- Reduce 2 equipment?Low Labor – 1/3 Testing time， Reduce 2/3 Labor